✕
✕
✕
M-Series

M-Series

M‑Series Portable Power Packs

Portable, high-output current generators used to magnetize parts during wet-method and dry-method MPI. Designed for tough shop-floor or field environments and compatible with a wide range of Magnaflux benches and accessories.

Tag: Kategorier: , Varenummer (SKU): V3_2051
Varemærke:
Få et tilbud

Yderligere information

Mobile Power Packs Electromagnetic Current Generators for AC or HWDC Magnetization

The M-Series mobile power pack portable current generators facilitate testing of large and abnormally heavy parts with magnetic particle inspection. Magnaflux understands some parts cannot be moved so the magnetizing station needs to be brought to the part. The M-Series offers a solution by providing an adaptable mobile unit. These units feature AC or Half Wave DC output.

M-Series magnetic power packs are available in three configurations: M-2030, M-2040 and M-2060.

Comparison

 M-2030 M-2040 M-2060
Contact Current Capacity (amps) AC 3,000 4,000 6,000
HWDC  3,000 4,000 6,000
Rated With 90 ft / 27 m of 4/0 cable 30 ft / 9 m of 4/0 cable Two sets of 30 ft/ 9m 4/0 cables (connected in parallel)
Dimensions 46 x 23 x 39 in / 17 x 54 x 99 cm 46 x 23 x 39 in / 17 x 54 x 99 cm 46 x 23 x 39 in / 17 x 54 x 99 cm
Weight 780 lb / 354 kg 750 lb / 340 kg 780 lb / 354 kg

Benefits

  • Ability to easily move the unit to the part for inspection
  • Convenient hook on back side of unit to wrap cables after use, saves space as well as keeps cables lasting longer without being dragged along the floor when moved
  • Can add-on a 15 ft / 4.5 m remote control cable for energizing from a distance (part no. 622124)

Features

Exterior Interior
  • Digital Meter Display
  • Two Bus Bars for Connection
  • Push button Switch for AC output
  • Push button Switch for HWDC output
  • Push button Switch for Mag – Momentary–magnetizes as long as button is pushed
  • Push button Switch for Demag – One touch auto cycle and switches to decaying AC automatically
  • Push button Switch for power on/off
  • Push button Switch for pulse – 1.5 sec on, 3 sec off for 30 sec
  • Infinitely variable current control
  • Two (2) fixed heavy-duty casters
  • Two (2) swivel casters with locks
  • Lift hooks for extra unit mobility
  • 115 Volt Convenience Outlet (10 amp)
  • Thermal Overload for circuitry protection
  • PLC Circuitry for extra reliability
  • Secondary Current Control
  • Flow through cooling for heat dissipation
  • Solid State Switching (AC to HWDC)

M-2030

Specifications

  • Output: 3,000 amps AC and HWDC magnetizing current
  • Output rated with 90’ total of 4/0 cable
  • Dimensions: 46” L x 23” W x 39” H
  • Weight: 780 lbs.
  • Available Voltages: 380, 415, 460, 575, 50 or 60 hertz, single phase power
  • 7% Duty Cycle (maximum output with 1/2 minute ON time)

M-2030 for long cable output is designed for applications in which the power source cannot be close to the inspection piece. This unit designed to work with long cable lengths necessary for inspecting large parts (i.e. power generator parts).

M-2040

Specifications

  • Output: 4,000 amps AC and HWDC magnetizing current
  • Output rated with 30’ of 4/0 cable
  • Dimensions: 46” L x 23” W x 39” H
  • Weight: 780 lbs.
  • Available Voltages: 230, 380, 415, 460, 575, 50 or 60 hertz, single phase power
  • 7% Duty Cycle (maximum output with 1/2 minute ON time)

M-2060

Specifications

  • Output: 6,000 amps AC and HWDC magnetizing current
  • Output rated with two 30’ of 4/0 cables ran in parallel
  • Dimensions: 46” L x 23” W x 39” H
  • Weight: 780 lbs.
  • Available Voltages: 380, 415, 460, 575, 50 or 60 hertz, single phase power
  • 7% Duty Cycle (maximum output with 1/2 minute ON time)

Ordering Information

Magnaflux magnetic particle equipment is built to orderPlease download and complete the MPI Checklist, linked above, and contact us for a detailed quote.

Product Properties

NDT TypeFluorescent Magnetic Particle Testing, Visible Magnetic Particle Testing

Resources

Få et tilbud

    Relaterede varer